Here are some questions on the Fire alarm system and the Fire command Station.

1. Where is the Fire Command Station usually located?

A. In the office of the FSD

B. On the Basement

C. On the ground floor

D. Can be on any floor of the building

2. Choose the correct statement concerning trouble signals received at the fire alarm panel.

A. Will be indicated by only a red lamp at the alarm panel

B.Will be indicated by only a yellow lamp at the alarm panel

C. Will be indicated by a red lamp and a warning tone at the alarm panel

D. Will be indicated by a yellow lamp and a warning tone at the alarm panel

3. Choose the incorrect statement concerning the Fire Command Station.

A. Can be near the elevator control panel in the lobby

B. Will have at least twelve 2642 elevator keys available

C. Will have the alarm panel located there

D. Will have a copy of the Fire Safety Plan located there

4. Choose the incorrect action for the FSD to take.

A. FSD reports to the Fire Command Station during a fire alarm.

B. Order the Building engineer to respond to the Fire Command Post to assist with information.

C. Order the Fire Wardens to evacuate the occupants to the roof.

D. Have available a copy of the Fire Safety Plan.

5. How many master room keys must be available at the Fire Command Post in a Class J-1 building?

A. Only 1 key per floor.

B. Only 2 keys per floor

C. 1 key per floor plus at least 2 keys for every 50 rooms.

D. 1 key per floor plus at least 1 key for every 50 rooms.

6. What is the silent test?

A. A test of the fire alarm systems central station connection

B. A test of the sprinkler system.

C. A test of the Standpipe system.

D. A test of the elevators.

7. The fire alarm lamp test should be performed at least?

A. Hourly

B. Daily

C. Weekly

D. Monthly

8.  The test of your Central Station connection shal be performed how often?

A. Daily

B. Weekly

C. Monthly

D. Quarterly

AnswerC

AnswerD

AnswerB

AnswerC

AnswerD

AnswerA

AnswerB

AnswerC